Marble Stairs Detail; The Shadow Line

Select the suitable stairs finish is a hard mission, especially for homeowners. There are a variety of finishing materials, details and style. Marble is the common use material that is strong and has a nice appearance despite it classic style. Personally as much as I love marble but i struggle to find a modern details. The shadow line detail is a method to get a modern appearance, that is suitable for the most type of marble. The shadow line has flush clean look with no overhang nosing to have a modern appearance. With a thin black granite underneath the riser, it shows each step by itself individually.

Marble stairs, with shadow line detail
Marble stairs at Labib 2 building, Gaza Palestine By architect Zahi Alrayyes and marble from Zomord Marble.

when to use the shadow line detail

As mentioned before the shadow line detail is suitable with many kinds of marble. It’s the best choice with marble that have different tones like Flower Beige marble as shown in the below photo. The shadow line detail will separate each step by its own, then people will not easily notice the difference in marble tones. Also it’s suitable with marble that has many veins, it displays the beauty of each step. On the other hand, it’s not nice with clear marble that look similar tone and doesn’t have veins. It’s not a bad choice but it won’t add much to the marble and stairs. 

Shadow line steps
Marble stairs at Labib 2 building, Gaza Palestine By architect Zahi Alrayyes and marble from Zomord Marble. The marble is Flower Beige a Turkish product that has a variety of veins and difference in background tones.

Installing shadow line marble stairs

The shadow line detail is simple and cheap detail comparing to another marble details. Because its regular straight steps with a 2cm black granite underneath the riser. Granite is prefer to used and not marble, because it’s thin we need a plain black color. Also granite is more rigid material to avoid the break the 2cm piece through cutting process. Personally I prefer black shadow line to be thinner than 2cm but then it will become weaker. There are three types of black granite, beside artificial stone read How to Select Black Granite article for more information. Artificial stone is not suitable because it will efflorescence and appear with with grey and white spots. The craftsmen need to cut the granite using saw cutting machine at marble factory, and then to glue it with the riser according to floor and riser height.

shadow line stairs marble installation
how to install shadow line marble stairs, Gaza 2019 by Architect Zahi Alrayyes. Marble from Zomord Marble and installed by A. Muhassien

In conclusion, It’s not the only modern marble stairs detail, but it’s suitable for marble that has variety of tones or density veins. The shadow line detail is cheap compared to another modern marble stairs details. Also it’s well-designed, the design is avoiding water collecting and has no fine details that could break in the future.

Marble edges finishing

Decorations using marble are majestic, marbles’ colors, veins and glossiness and much to space beauty. Marble wall cladding appear elegant when it appear as it build out of marble blocks, try to avoid to appear as tile cladding. Although contemporary interior designers like to have lightweight materials feeling, this through appear the thickness of marble tiles. Edges connections affect feeling of marble materials, this topic will discuss some edges connections techniques. We could classify marble corners types as traditional method, 45 degree method, half on half method and fillet method. 

Traditional Marble Edges Connection

Traditional connection is to install marble as shown in the photo above, it’s simple connection and easy to install. However it’s simple, marble appear cheap as it’s a cladding of few centimeters. Usually marble’s face is polished or treated, but edges need to be polished at site. Some types of marble will polished at site and appear as it face. Other types like Crema Nova, Omani marble, black marble and granite or any high strength marble won’t give good results. Polishing high strength marble requires to polish using different grades sanding papers to get to smoother surface. If the results are unsatisfactory, craftsmen paint edges by lacquer to get glossiness, however lacquer won’t last long. Edges need to be polished before installing, to avoid ruin glossiness of other marble tiles during polishing. Therefore designers and craftsmen looking for other edges connection methods.

Traditional Marble Edges Connection
Traditional Marble Edges Connection
Traditional Marble Edges Connection
Traditional Marble Edges Connection, Gaza

45 degrees Marble Edges Connection

45 degrees edges connection fit marbles that have veins, it gives the continuity of surfaces  appearing as a marble block. This connection doesn’t need to polish edges as in traditional connection. Implement this connection by trimming both edges at 45 degree then to install them together. The connection will be very thin, and require to fill either by tiles grout or marble adhesive. When edge cut at a 45 degree thin as pencil, soft marble will cut perfectly, but high strength marble will fragment. Alignment is another problem face this connection, where if angle is less than 90 degrees craftsman can’t install it. Therefore craftsman like to make narrower than 45 degrees to align easier, however it will fragment easier during edge cutting. Also 45 degrees connection used for ceramic and some types of porcelain, when tiles body is different than tiles face.

45 degrees Marble Edges Connection
45 degrees Marble Edges Connection
45 degrees Marble Edges Connection
45 degrees Marble Edges Connection, Gaza 2016

Half on Half Marble Edges Connection

All of the above connections have disadvantages make designers looking for new solutions. Half on half is a new connection method that require a groove at on end or by two ends. Advantage of half on half that craftsman could modify the edge after installation, where it will show a nice detail. Shade and shadow appear the beauty of this connection, as a tiny edge effect either in outdoor or indoor. This connection is expensive compared to previous connections because it requires a skilled craftsmen and wet table saw.

Half on Half Marble Edges Connection, Gaza 2016
Half on Half Marble Edges Connection, the two ways to implement this method, Gaza 2016
Half on Half Marble Edges Connection
Half on Half Marble Edges Connection, Gaza 2016

Fillet Marble Edges Connection

Fillet method is by creating a 45 degrees connection then to polish the edge either on angle or round edge. This method will give safe edges, hard to break and will not allow people to notice where the connection is. This connection requires well polishing of the edge to appear nice, and since this it need to polish a marble workshop. Then this connection is suitable for kitchen top and freestanding applications.

 Fillet Marble Edges Connection
Fillet Marble Edges Connection
 Fillet Marble Edges Connection
Fillet Marble Edges Connection, Gaza 2016
Why we don’t use tiles trim for marble?

We can, however tiles trim look cheap compared to marble lavishness. Simply it doesn’t fit marble.

How to select marble edge type for building elevation?

It’s a game of scale. Basically view difference where close view like ground floor need to be well implemented. On the other hand, marble installed at far distance from eye will not appear if it’s not well polished. Generally in far distance from eyes use simple edges connections, and expensive connections at close distance.

How to install Palestinian Stones edges

Palestinian stone usually has rough surface, i prefer to install it half on half. In traditional edges case, make sure to rough the edges like in the right hand side wall.Palestinian stone edges

Methods of ceiling marble cladding

Marble ceiling cladding gives the architecture feeling of marble masses, the building appear as a piece of marble. However there are several types to install marble at ceilings, each method has advantages and disadvantages. Through this article we will discuss ceiling cladding methods,then you can make a decision about which method to use.

There are three methods of installing marble at ceilings. A method before casting the slab and two methods after casting the slab, one of them is using mechanical system. We will discuss the mechanical way of installing in another topic.

Before casting slab method

it’s the most common and simplest way of installing. Where marble place on the wooden framework, and it installs a steel inside the marble. Marble adhesive used to connect marble tiles together. This method sounds easy but it doesn’t reach a good result because it may move during concrete casting. Tiles could move, then it is recommended to put a mortar over the marble to enhance the bond and to protect marble adhesive from ruin by sun rays.

A problem facing this method, frameworks surface is hard to get it leveled, and any defect will appear clearly. Solving this problem can be either by chamfer the tiles edges, then it’s hard to notice its not level. Another alternative is to adopt the wood frame level, either by putting an over layer plywood to re-level the surface. For professional it’s recommended to make cladding surface lower than the rest of the slab by 5 cm. Then put sand into this area and arrange marble tiles as its verse tiling, then you can control the level precisely. 

marble cladding for ceilings methods
During working at marble cladding for ceiling, and before installing it rips blocks and steel bars. Gaza 2018
This craftsman, install Travertine tiles for ceiling cladding, using before casting method. He uses small marble pieces to gather tiles at same level by marble adhesive. Gaza, ORIGIN DESIGN, 2019
marble cladding for ceilings defects
marble cladding for ceilings defects, Gaza 2018

After casting slab – by casting method

This method has a better quality than the previous method, but it is not suitable for a large area. By making a new framework underneath the slab and by leaving the thickness of the marble and a space for cement mortar. Then steel wire will connect to the marble tile, after that arrange marble at the framework. Then connecting the marble wires to a steel mesh connecting to the concrete slab, and then it’s ready for concrete casting. We need to cast the concrete from the top, this by opening a 10 cm open at the concrete slab. But be aware to add more water to the concrete and extra cement to have a good concrete suitable for this job. It’s better to open several openings for casting at the slab. Because we need concrete to reach the top and air will get out through them.

After Casting method, Gaza 2018

As much as marble has a brilliant appearance at ceiling but also installing it is not an easy job, and it’s hard to fix and defects after installing.