Tile mortar used to bond tiles to wall. There are two main options as mortar, cement mortar and tile adhesive mortar. Cement material is not glue, dissolving cement with water become fluid state. It poured in between other materials pores and when it dries it becomes rigid and bonding different materials. Porcelain doesn’t have pores, means cement will not bond with it. Unlike ceramic where cement mortar poured into ceramics, it bonding it to wall. As well as, the wall need to be rough to increase bonding mortar to wall. Tile Adhesive is white cement, with materials like glue and other admixture to increase setting time. Since tile adhesive has glue, it’s better than cement mortar for porcelain.
Cement mortar make either from white or Portland cement. Portland cement has dark gray color, it gives the porcelain tiles darker tone color. Therefore white cement is better especially for white and light colors tiles. Mixing cement mortar at site, where each 50KG cement bag need 12 Sand buckets and 0.5 bucket of lime. Lime gives the mortar elasticity to enhance workability, in high humidity areas we prefer to use hydrated lime S. Sometimes, craftsmen add shampoo to cement mortar which I reject because it weakens the mixture. Notice that cement has initial setting time, and mortar has to used within half an hour. When installing porcelain with cement mortar make a mixture of water and cement only, and pour it between tile and cement mortar.
Mortar adhesive is available in different types, ISO13007 has classified the tile adhesive in codes. The following table will describe the main letter used to write the code, and what each means.
To convert the above table to function
C1E : Internal use for ceramic flooring, small tiles
C1TE : Internal use for ceramic walls, small tiles
C2E : Internal use for porcelain or large scale tiles flooring
C2TE : Internal use for porcelain or large scale tiles walls
C2TES1: External use and swimming pools.
C2TES2 : External use building elevations.
Using salted water is forbidden in construction. Salted water reduce mortar life, the appearance of efflorescence and then tile will loose and fall. Always use a drinking water to protect the beauty of tile work and to increase it life. Since porcelain and ceramic tiles’ laid on tile adhesive or cement mortar . Both has cement that contain calcium hydroxide which is formed during the cement hydration. When rain water pass through tiles grout will dissolve calcium hydroxide then tile will lose from mortar. Avoiding this use salt water resistant sealer admixture to mortar for avoiding this problem even with drinking water.
This information in enough to understand tiles mortar. Notice that low quality tiles mortar will ruin the tiles, take the right decision and feel free to ask any questions.